Page 1 of 1

Official NL 7.0b3 r&e problems

Posted: Mon Dec 22, 2014 10:00 am
by Eric10301
While the check/repair function is faster, it also reports broken files as complete. This means extraction fails and you have to manually repair them yourself before NL can finish.

Re: Official NL 7.0b3 r&e problems

Posted: Mon Dec 22, 2014 10:47 am
by tvgeloof
I haven't seen that one happening, but I did have 2 cases where the file appeared to be repairing, but it didn't actually do anything.
So after the repair the set was still missing 2 blocks.
A few minutes later a 2nd attempt to repair was made (I didn't intervene in any way) and than it repaired and extracted without issues.

Re: Official NL 7.0b3 r&e problems

Posted: Tue Dec 23, 2014 2:41 pm
by doppler
I had a set where only the nfo file was missing. After the "repair" for the missing file was completed. The set did not extract.
A manual par set repair found a bad file. Repair was possible and extracted correctly.

Yes, the test/par is faster. But there is a bug in there.

Re: Official NL 7.0b3 r&e problems

Posted: Tue Dec 23, 2014 8:10 pm
by tinus
I agree. Keeps on "hanging" at Ready to Initialize or Ready to Extract and there's always one set with the status Initializing [2]

But eventually it will restart/continu.

Re: Official NL 7.0b3 r&e problems

Posted: Wed Dec 24, 2014 3:36 pm
by Tuinpad
Since i try Newsleecher 7.0 B1 and realize it was the worst Newsleecher ever that is out.
So i waited until 7.0B3 is out and realize its still not beta, i would call it Alpha.

Still can't changed the destiny, i download the file to my computer.
And after repair i like to send it to the server with date and time (!RnE )
And this still NOT works!

So i update the software to Newsleecher 6.5 Beta6 (the best until now)

Re: Official NL 7.0b3 r&e problems

Posted: Sun Dec 28, 2014 11:38 am
by Spiril
Eric10301 wrote:While the check/repair function is faster, it also reports broken files as complete. This means extraction fails and you have to manually repair them yourself before NL can finish.
I think we got the bug fixed in this forum test release :

http://www.newsleecher.com/nl70004.ufr1.exe

Re: Official NL 7.0b3 r&e problems

Posted: Tue Dec 30, 2014 3:35 am
by Eric10301
Spiril wrote:
Eric10301 wrote:While the check/repair function is faster, it also reports broken files as complete. This means extraction fails and you have to manually repair them yourself before NL can finish.
I think we got the bug fixed in this forum test release :

http://www.newsleecher.com/nl70004.ufr1.exe
I've only downloaded 3 things so far with the new beta, so I can't say for sure if the incomplete bug is fixed, but I did notice that it's still not renaming the nfo/sfv files 100% of the time with obfuscated posts. As reported here: viewtopic.php?f=9&t=25743

Re: Official NL 7.0b3 r&e problems

Posted: Tue Dec 30, 2014 3:49 pm
by Sunfox
I've also noticed that it is occasionally *completely* analyzing broken files wrong, saying numerous files have only 1-5% available blocks, resulting in a download being reported as unrepairable, while other PAR software reports 95-99% available blocks on the same files and has no trouble fixing it. I know this was never an issue before, so it must be something new.

Re: Official NL 7.0b3 r&e problems

Posted: Tue Dec 30, 2014 6:02 pm
by allright
Tried with 6 imported nzb

After r/e the status in the window is
1 - finished
2 - Password protected with unknown password
3 - finished
4 - Password protected with unknown password
5 - Unable to copy/Move file, returned error "access denied"
6 - Password protected with unknown password.

The windows doesn't show the real status, a check shows that this is what happend
1 - Ok, unpacked and files has been deleted ok.
2 - Unpacked ok, but files has not been deleted
3 - Ok, unpacked and files has been deleted ok.
4 - Unpacked ok, but files has not been deleted
5 - Nothing has happend, Multipar reports no errors, and could unpack and delete it manually without any issues.
6 - Unpacked ok, but files has not been deleted.

Log lines included in file