autounpack with Newsleecher

Post your questions here if you need help to use NewsLeecher or if you have a question about a feature.

Post Reply
Taucher
Posts: 4
Joined: Thu Nov 12, 2020 4:14 pm

autounpack with Newsleecher

Post by Taucher »

I´ll hope someone can help.
Im downloading to a folder called DOWNLOADS,
Im using MULTIPAR to correct from PACKET - FAILURE
The WINRAR PACKETS do have a passcode. The isssue
is to autounpack the content from DOWNLOADS to EXTRACTED
and put the wirarpackets in the recycle bin.

User avatar
AmigaMan
Posts: 38
Joined: Mon Aug 05, 2019 1:31 am

Re: autounpack with Newsleecher

Post by AmigaMan »

Taucher wrote:
Tue Nov 17, 2020 12:05 pm
The isssue
is to autounpack the content from DOWNLOADS to EXTRACTED and put the wirarpackets in the recycle bin.
you can do this from the Settings > Repair / Extract
Repair-Extract.png
Repair-Extract.png (79.17 KiB) Viewed 420 times
unfortunately Newsleecher does not provide a way of calling external utilities like MultiPAR or WinRar, it could be possible to write a script to automate MultiPAR as it supports CLI as does UnRAR which is bundled with WinRar, but you would still have to manually download any PAR2 files needed to fix damaged files as there would be no way of injecting the results from MultiPAR back into Newsleecher.

I only use Newsleecher to search and download files and do not use the automated Repair & Extract functions

Taucher
Posts: 4
Joined: Thu Nov 12, 2020 4:14 pm

Re: autounpack with Newsleecher

Post by Taucher »

Thx unfortunately it didn't work.

Post Reply